Barry Arkles

Y. Pan, A. Maddox, T. Min, F. Gonzaga, J. Goff, B. Arkles, Surface-Triggered Tandem Coupling Reactions of Cyclic Azasilanes, Chemistry An Asian Journal, 2017, 1198-1203

B. Arkles, J. Goff, S. Sulaiman, A. Sikorsky, Ultra-High Elongation Silicone Elastomers, Rubber World, 2016, in press

D. Kim, J. Joo, Y. Pan, A. Boarino. Y. Jun, K. H. Ahn, B. Arkles, M. J. Sailor, Thermally Induced Silane Dehydrocoupling on Silicon Nanostructures, Angawandte Chemie, 2016, in press

D. Kim, J. Joo, Y. Pan, B. Arkles, M. J. Sailor, Dehydrogenative Silane Couplng on Porous Silicon, 10th Porous Semiconductors Science and Technology (PSST) International Meeting, 2016, 04-P1-28/396

Goff, B. Arkles, S. Sulaiman, B. Arkles, J. Lewicki, Soft Materials with Recoverable Shape Factors from Extreme Distortion States, Advanced Materials, 28 (12), 2393-2398, 2016; DOI: 10.1002/adma.201503320

B. Arkles, J. Goff, S. Sulaiman, Silicone Elastomers with Exceptional Elongation, Proc. 188th ACS Rubber Division, 2015

Maddox, A., Matisons, J., Singh, M., Zazyczny, J., Arkles, B., Single Molecular Layer Adaption of Interfacial Surfaces by Cyclic Azasilane "Click-Chemistry,” MRS Symp Proc, 1793, April, 2015; DOI:10.1557/opl.2015.655

B. Arkles, Pan, Y., Kaloyeros, A. E., Thin-Film Deposition of Silicon Nitride and Oxides from Trihydridosilanes, Atomic Layer Deposition 10, ECS Transactions 64(9), 243-249, 2014.

B. Arkles, Y. Pan, G. Larson, Mani Singh, Enhanced Hydrolytic Stability of Siliceous Surfaces Modified with Pendant Silanes” Chemistry - A European Journal, 20, 9442-9450, 2014; DOI: 10.1002/chem.201402757

M. P. Singh, H. K. Keister, J. G. Matisons, Y. Pan, J. Zazyczny, B. Arkles, “Dipodal Silanes: Important Tools for Surface Modification to Improve Durability,” MRS Proc., 2014, 1648; DOI:10.1557/opl.2014.257

Goff, J., Kimble, E., Arkles, B., “Living Polymerization Routes to Siloxane Macromers and Higher Order Silicone Structures”, in Silicones and Silicone-Modified Materials VI ed S. Clarson ACS Symposium Series 1154, 59-78, 2013.

Goff, J., Arkles, B., Sulaiman, S., “Modification of Silicone Elastomers Using Silicone Comonomers Containing Hydrophilic Surface Active Endgroups”, Mater. Res. Soc. Proc. Vol 1626, 2014, DOI: 10.1557/opl.2014.11

Arkles, B., King, K., Pannell, K., Hydroxymethylsilanetriol - A Simple Analog of Silicic Acid, Silicon, 2013, 5, 187; DOI 10.1007/s12633-013-9146-2

Pan, Y., Arkles, B., Kendenberg, J., Preparation of Aromatic Silanes as High Thermal Stability Coupling Agents, Advanced Materials Research, 2013, 690-693, 1483; DOI 10.4028/www.scientific.net/AMR.690-693.1483

Goff, J., Arkles, B., Olenick, L., Kimble, E., Silicone Elastomers By Step-Growth Polymerization of Monodisperse Dual Functional Silicones, Polymer Preprints, 2012, 53(1), 486.

Arkles, B., Goff, J., Olenick, L., Kimble, E., Larson, G., Dual Functional Silicones as Building Blocks for Higher Order Silicones, Polymer Preprints, 2012, 53(1), 474

Pan, Y., Arkles, B., Eisenbraun, E., Kaloyeros, A., Long-Chain Organofunctional Silanes: Synthesis and Surface Derivatization, Advanced Materials Research, 2012, 415-417, 1829.

Arkles, B., Pan, Y., Kim, Y.M., Eisenbraun, E., Miller, C., Kaloyeros, A., Hydridosilane Modification of Metals: An Exploratory Study, J. of Adhesion Sci and Technol., 2012, 26, 41-54.

Hollenberg, J., Kim, Y., Pan, Y., Arkles, B., Surface Treatments to Improve Pigment Dispersions in Aqueous Media, J. of Cosmetic Science, 61 (5), 407-8; Soc. Cosm. Chemists. Proc. Dec. 2010.

Kimble, E. , Arkles, B., Cameron, R., Symmetric Silicone Macromers, ACS Poly. Mater. Sci. Eng. Preprints, 2009, 50(2), 859

Arkles, B., Pan, Y. Kim. Y.M, The Role of Polarity on the Substitution of Silanes Employed in Surface Modification, in “Silanes and Other Coupling Agents Vol 5, K. Mittal Ed. p.51 VSP (Brill) 2009

Arkles, B., Zazyczny, J, Dipodal Silanes, Adhesives and Sealants Industry, Nov. 2008.

Hollenberg, J., Arkles, B., Pan, Y., The Effect of Varying the Alkyl Group on the Performance of Alkyl Trialkoxysilanes Used to Surface Modify Cosmetic Pigments and Fillers, J. Cosmetic Science, 2007, 58(2),192-192

Kaloyeros, A., Stan, M.R., Arkles, B., Geer, R., Eisenbraun, E. T., Reynolds, J.E., Gadre, A., Yongqiang Xue, Ryan, J., Conformational Molecular Switches for Post-CMOS Nanoelectronics, IEEE Transactions: Circuits and Systems 1, 54(11), 2345-2352, Nov. 2007

Arkles, B., Hydrophobicity, Hydrophilicity and Silanes, Paint and Coatings International, 22(10), 114, 2006.

Arkles, B., Pan, Y Larson, J, Berry, D., Cyclic Azasilanes: Volatile Coupling Agents for Nanotechnology, in Silanes and Other Coupling Agents, Vol. 3, K. Mittal (Ed.) VSP (Brill), 2004, p 179-191

Arkles, B. Commercial Applications of Sol-Gel-Derived Hybrid Materials, MRS Bulletin, 26(5), 402, 2001

Ezbiansky, K., Berry, D., Composto, R., Arkles, B. Fluoride Catalyzed Conversion of b-acetoxethylsilsesquioxane: chloride free precursor for silica films, Polymer Preprints, 42(12), 2001

Londergan, A., Nuesca, G., Goldberg, C., Peterson, G. Kaloyeros, A., Arkles, B., Sullivan, J., Interlayer Mediated Epitaxy of Cobalt Silicide on Silicon (100) from Low Temperature Chemical Vapor Deposition of Cobalt: Formation Mechanisms and Associated Properties J. Electrochem. Soc., 148, C21, 2001

Kaloyeros, A., Chen, X., Lane, S., Frisch, H., Arkles, B., Tantalum diffusion barrier grown by inorganic plasma-promoted chemical vapor deposition: Performance in copper metallization, J. Mater. Res., 15(12), 2000.

Laxman, R., Hendricks, N., Arkles, B., Tabler, T., Synthesizing Low-k Materials for Fab Use, Semiconductor International, Nov., 2000, 95-102

Eisenbraun, E., Upham, A., Dash, R., Zeng, W., Hoefnagels, J., Lane, S., Anjum, D., Dovidenko, K., Kaloyeros, A., Arkles, B., Sullivan, J., Low temperature inorganic chemical vapor deposition of Ti-Si-N diffusion barriers for gigascale copper interconnect applications, J. Vac. Sci. Technol. B 18(4), 2011, 2000

Ezbiansky, K., Arkles, B., Composto, R., Berry, D., b-Acetoxyethyl Silsesquioxanes: Chloride-Free Precursors for SiO2 Films via Staged Hydrolysis, MRS Proc., 606, 251, 2000

Arkles, B., Commercial Hybrid Organic-Inorganic Polymers in “Organosilicon Chemistry IV” eds. Auner, N, Weiss, J., p.592-612, Wiley-VCH, 2000.

Eisenbraun, E., Kelsey, J., Lane,, S., Belyansky, Y., Carlsen, A., Kumar, K., Anjum, Kaloyeros, A., Arkles, B., Sullivan, J., Integration of CVD W- and Ta-based Liners for Copper Metallization, Semiconductor Online.1/19/2000

Arkles, B., Hybrid Polymers in the Marketplace, CHEMTECH, 29(12), 7, 1999.

Ivanova, A., Nuesca, G., Chen, X., Goldberg, C., Kaloyeros, A., Arkles, B., Sullivan, J., The Effects of processing parameters in the chemical vapor deposition of cobalt from cobalt tricarbonyl nitrosyl, J. Electrochem. Soc., 146(6), 2139, 1999.

Pan, Q., Gonzalez, B., Composto, R., Wallace, W., Arkles, B., Figge, L., Berry, D Spin-on-glass thin films prepared from a novel polysilsesquioxane by thermal and ultraviolet-irradiation methods, Thin Solid Films, 345, 244, 1999

Chen, X., Peterson, G., Goldberg, C., Nuesca, G., Frisch, H., Kaloyeros, A., Arkles, B., Sullivan, J., Low-Temperature Chemical Vapor Deposistion of Tantalum Nitride from Tantalum Pentabromide for Integrated Circuitry Copper Metallization Applications, J. Mater. Res., 14(5), 2043, 1999

Kelsey, J., Goldberg, C., Nuesca, G., Peterson, G., Kaloyeros, A., Arkles, B., Low Temperature Metal-Organic Chemical Vapor Deposition of Tungsten Nitride as Diffusion Barrier for Copper Metallization, J. Vac. Sci. Technol., B 17(3), 1101, 1999.

Chen, X., Frisch, H., Kaloyeros, A., Arkles, B., Low Temperature Plasma-Promoted Chemical Vapor Deposition of Tantalum Nitride from Tantalum Bromide for Copper Metallization, J. Vac. Sci. Technol., B 17(1), 182, 1999.

Chen, X., Frisch, H., Kaloyeros, A., Arkles, B., Low Temperature Plasma-Promoted Chemical Vapor Deposition of Tantalum from Tantalum Bromide for Copper Metallization, J. Vac. Sci. Technol., B 16(5), 2887, 1998

Kumta, P., Hepp, A., Beach, D., Arkles, B., Sullivan, J., editors “Chemical Aspects of Electronic Ceramics Processing”, MRS, 1998.

Lin, L., Endisch, D., Chen, X., Kaloyeros, A., Arkles, B., Silicon Nitride Films Deposited by Atmospheric Pressure Chemical Vapor Deposition, MRS Proc., 495, 107, 1998.

Faltermeier, C., Goldberg, C., Jones, M., Upham, A., Kerr, A., Ivanova, A., Peterson, G., Kaloyeros, A., Arkles, B., The Effects of Processing Parameters in the Low-Temperature Chemical Vapor Deposition of Titanium Nitride from Tetraiodotitanium,” J. Electrochemical Society, 145, 676, 1998.

Arkles, B., Silicon Compounds (Ethers and Esters), Kirk-Othmer Encyclopedia of Chemical Technology, 22, 69,1997, Wiley.

Arkles, B., Silicon Compounds (Silanes), Kirk-Othmer Encyclopedia of Chemical Technology, 22, 38, 1997, Wiley.

Arkles, B., Berry, D., Figge, L., Composto, R. Chiou, T., Colazo, H., Wallace, W., Staged Development of Silicon Dioxide Films, Journal of Sol-Gel Science and Technology, 8, 465-469, 1997

Faltermeier, C., Goldberg, C., Jones, M., Upham, A., Manger, D., Peterson, G., Lau, J., Kaloyeros, A., Arkles, B., Paranjpe, A., Barrier Properties of Titanium Nitride Films Grown by Low Temperature Chemical Vapor Deposition from Titanium Tetraiodide,” J. Electrochemical Society, 144, 1002, 1997.

Arkles, B., Future Developments in Silicon Chemistry- An Industrial Perspective in “Progress in Organosilicon Chemistry” B. Marceniec and J. Chojnowski, eds, Gordon and Breach, 571-579.

Arkles, B., Grignard Reagents and Silanes in “Handbook of Grignard Reagents” G. Silverman and P. Rakita eds, Marcel-Dekker, p.667, 1996.

Goldberg, C., Eisenbraun, E., Komarov, S., Faltermeier, C., Chen, X., Jones, M., Avanova, A., Flordalice, R., Pintchovski, F., Arkles, B., Hepp, A., Kaloyeros, A., Low Temperature In-Situ Chemical Vapor Deposition of Ti/TiN Ultrathin Bilayers for ULSI Barrier Applications in “Advanced Metallization for ULSI Applications 1994” eds. R. Blumenthal, G. Janssen, Mat. Res. Soc. 1995

Lou, I., Chen, L., Eisenbraun, E., Shemerhorn, E., Toscano, P., Thomas, M., Arkles, B., Kaloyeros, A., Plasma-Assisted Chemical Vapor Deposition of Gold for ULSI Multilevel Metallization Schemes, in “Advanced Metallization for ULSI Applications 1993” D. Favreau, Y. Sacham-Diamand, Y. Yoriike, Mat. Res. Soc. 1994, p569-573.

Arkles, B., Future Directions in Silicon Chemistry, Main Group Chemistry News, 2(2), 4 1994.

Faltermeier, F., Eisenbraun, E., Liu, J., Dettelbacher, C., Toscano, P., Arkles., B., Kaloyeros, A., MOCVD of Tungsten for Multilayer Interconnects, in “Advanced Metallization for VLSI Applications 1992” eds. T. Cale, F. Pintchovski, Mat. Res. Soc. 1993

Arkles, B., Steinmetz, J., Zazyczny, J., Mehta, P., Factors Contributing to the Stability of Alkoxysilanes in Aqueous Solution, J. Adhesion Sci. & Technol., 6, 193, 1992; also included in “Silanes and Other Coupling Agents” ed. K. Mittal, VSP, 1992, p 91.

Arkles, B., Steinmetz, J., Zazyczny, J., Zolotnitsky, M., Stable, Water-Borne Silane Coupling Agents, 46th Soc. Plas. Ind. Composites Inst. Proc., 46, 2-D, 7pp, 1991.

Arkles, B., Crosby, J., Polysiloxane - Thermoplastic Interpenetrating Polymer Networks, in ”Silicon Based Polymer Science: A Comprehensive Resource” ed. J. Zeigler, G. Fearon, American Chemical Society, 1990.

Arkles, B., Vogelaar, G., Better Way To Pick Silicone Fluid, Machine Design, 60(20), 81, 1988

Arkles, B., Steinmetz, J., Hogan, J., Polymeric Silane Coupling Agents Enhance Strength of Composites, Modern Plastics, 64(4), 138, 1987.

Pannell, K. H., Rico, E., LaNeave, C., Rahimian, K., Amaya, A., Arkles, B., Silacrown Ionophores, J. Membrane Sci., 32, 83, 1987.

Arkles, B., Steinmetz, J., Hogan, J., Polymeric Silanes: An Evolution in Coupling Agents, 42nd Soc. Plastics Ind. Composites Inst. Proc., 42, 21-C, 1987

Arkles, B., Lydzinski, D., Brinigar, W., Chao, T., Siliconization: Blood - Surface Interaction in “Silanes, Surfaces and Interfaces” (D. Leyden ed.) Gordon & Breach, New York, 1986.

Arkles, B., Silicon Nitride from Organosilazane Cyclic and Linear Prepolymers, J. Electrochem. Soc. 133, 233, 1986.

Arkles, B. What are IPN’s?, Plastics Technology, 31(8), 1985.

Pannell, K. H., LaNeave, C. K., Rico, E., Arkles, B., Concerning the Relative Non-toxicity of Silacrown Ionophores, Pharm. Biochem. Behav., 21, Supp. 1, 77, 1984.

Arkles, B., Carreno, C., Filler-Free Models for the Role of Organofunctional Silanes in Composites. Poly. Mat. Sci, Engg., 50, 440, 1984.

Arkles, B., High Performance and Thermoplastic Silicones for Biomedical Applications, Soc. Plas. Eng. 42nd ANTEC Proc., 1080, 1984.

Arkles, B., Carreno, C., Silicone IPN Modified Thermoplastics, Soc. Plas. Eng. 42nd ANTEC Proc., 486, 1984.

Arkles, B., IPN Modified Silicone Thermoplastics, Med. Dev. Diag. Ind., 5, 1983.

Arkles, B., Look What You Can Make Out of Silicones (Biomedical Applications of Silicones), CHEMTECH, 13, 542, 1983.

Arkles, B., A Reactive Processing Method for IPN Thermoplastics, Poly. Mat. Sci & Engg., 49, 6, 1983.

Arkles, B., Anderson, R., King, K., Silacrowns: Phase Transfer Catalysts, Organometallics, 2, 454, 1983.

Arkles, B., Redinger, P. Silicones in Biomedical Devices in “Biocompatible Polymers, Metals and Composites” (M. Szycher ed.) Technomic, Lancaster, p749, 1983.

Arkles, B., Silicon Compounds (Ethers and Esters), Kirk-Othmer Encyclopedia of Chemical Technology, 20, 912, 1982.

Arkles, B., Peterson, W., Silicon Compounds (Silanes), Kirk-Othmer Encyclopedia of Chemical Technology, 20, 887, 1982.

Arkles, B., Peterson, W. R., King, K., A New Class of Immobilizeable Phase Transfer Catalysts: The Silacrowns, in “Chemically Modified Surfaces in Catalysis and Electrocatalysis” (J. S. Miller ed.) Am. Chem. Soc., p. 281, 1982.

Arkles, B., New Generation Silicones for Medical Devices, Med. Dev. Diag. Ind. 3(4), 31, 1981.

Arkles, B., Peterson, W., High-Heat Silane Coupling Agents, Modern Plastics, 57(11), 69, 1980.

Arkles, B., Brinigar, W., Miller, A., Whole Cell and Cell Organelle Immobilization on Silica Substrates, in “Silylated Surfaces” (D. Leyden, W. Collins eds.) Gordon & Breach, New York, p.363, 1980.

Arkles, B., Silanes and Silicones in Semiconductors and Microelectronics, SEMICON WEST Proc., 1980.

Arkles, B., Peterson, W., New High Temperature Coupling Agents, 35th Soc. Plas. Ind. Composites Inst. Proc., 35, 20-A, 1980.

Brinigar, W.S., Arkles, B., Functional Properties of Rat Liver Mitochondria Immobilized on an Alkylsilylated Surface, Methods in Enzymology, 56, 550-557, 1979.

Arkles, B., Peterson, W., The Effect of Silanes on Size-Free Glass Fibers in Thermoplastic Composites, Org. Coat. Plas. Chem, 40, 538, 1979.

Arkles, B., Barbecuing - A Scientific Technological Effort, CHEMTECH, 8(8), IBC, 1978.

Arkles, B., Tailoring Surfaces with Silanes, CHEMTECH, 7(12), 766, 1977.

Theberge, J., Arkles, B., Knabb, D., Molded Plastic Magnets, Machine Design, 49(2), 1977.

Theberge, J., Arkles, B., Knabb, D., Magnetic Molding Compounds, 32nd Soc. Plas. Ind Composites Inst. Proc., 32, 14-G, 1977.

Arkles, B., Theberge, J., Schireson, M., Wear Behavior of Thermoplastic Polymer Filled Fluorocarbon Composites, Lubrication Engineering, 33(1), 33, 1977.

Arkles, B. C., Respiratory Properties Of Rat Liver Mitochondria, Dissertation Abstracts B 1976 No. 99,11,977.

Peterson, W., Arkles, B., Washburne, S., Reaction of Trimethylsilyl Azide with Bridged Bicylcic Olefins, J. Organomet, Chem., 121, 285, 1976,

Arkles, B., Theberge, J., Schireson, M., Wear Behavior of Thermoplastic Polymer Filled Fluorocarbon Composites, Compressed Air, (12), 1976.

Arkles, B., Tailoring Inorganic Surfaces with Organosilanes, Am. Inst. Chem. Eng. Proc., 69, Dec. 1976

Theberge, J. E., Cloud, P. J., Arkles, B., Predicting Wear in Reinforced Internally Lubricated Thermoplastics, Plastics World, 34(10), 46, 1976

Arkles, B. Schireson, M. J., The Molecular Weight of PTFE Wear Debris, Wear, 39, 177, 1976.

Theberge, J., Arkles, B., Robinson, R., Carbon Fiber Reinforced Thermoplastics, Ind. Eng. Chem. Prod. Res. Dev. 15(2), 100, 1976

Arkles, B., Brinigar, W. S., Worthy, W., Immobilized Organelles Aid Cell Chemistry, Chem. Eng. News. 54(2), 17, Feb 9, 1976

Arkles, B., Theberge, J., Stronger Thermopastic Elastomers, Machine Design, 48(3), 113, 1976.

Arkles, B. Theberge, J., Carreno, C., Designing with Fiber Reinforced and Internally Lubricated Thermoplastic Elastomers, 32nd Soc. Plas. Ind. Composites Inst. Proc., 13-E, 1976.

Arkles, B., Brinigar, W., Respiratory Behavior of Rat Liver Mitochondria Immobilized on Alkylsilylated Supports, J. Biol. Chem., 250(22), 8856, 1976.

Theberge, J., Arkles, B., Robinson, R., Carbon Fiober Reinforced Thermoplastics, Soc. Adv. Mat. Proc. Eng. J., 20(11), 72, 1975.

Arkles, B., Theberge, J., Cloud, P., Long Term Properties of Thermoplastic Composites, Soc. Plas. Eng., RETECH, 164, Oct. 1975.

Arkles, B., Gerakaris, S., Ewan, E., High Performance Functional Powder Coatings, Product Finishing, 40(1), 74-83, 1975.

Arkles, B., Theberge, J., Robinson, R., Carbon Fibers Produced Specifically for Discontinuous Reinforcement of Thermoplastics, ACS Org. Coat. Plas. Chem., 36, 10, 1975.

Arkles, B., Gerakaris, S., Apply a Function with Powder Coatings, Machine Design, 47(6), 103, 1975.

Arkles, B., Ewan, E., Nouvelle Poudres Pour Revetements A Haute Performances, Chimie-Actualities, (5), 40, 1975.

Theberge, J., Arkles, B., Cloud, P., How Time and Heat Affect the Properties of Plastics, Machine Design, 47(7), 79, 1975.

Theberge, J., Arkles, B., Cloud., P., Choosing Plastics for Chemical Resistance, Machine Design, 47(4), 103, 1975.

Theberge, J., Arkles, B., Cloud, P., Comparing High Temperature Plastics, Machine Design, 47(3), 73, 1975.

Theberge, J., Arkles, B., Cloud, P., Gerakaris, S., Elevated Temperature Performance of Thermoplastic Composites, 30th Soc. Plas. Ind. Composites Inst. Proc., 17-E, 16pp, 1975.

Arkles, B., Peterson, W., Fluoropolymer Solid Lubricants in “Advances in Polymer Friction and Wear” ed. L.H. Lee, Plenum, 453-467, 1974

Arkles, B., Gerakaris, S., Goodhue, R., Wear Characteristics of Fluoropolymer Composites in Advances in Polymer Friction and Wear” ed. L. H. Lee, Plenum, 663-688, 1974.

Theberge, J., Arkles, B., Wear Characteristics of Carbon Fiber Reinforced Thermoplastics, Machine Design, 46, 1974.

Theberge, J., Arkles, B., How Plastics Wear Against Plastics, Machine Design, 46, 1974

Arkles, B., Poly(fluorocarbons) for Powder Coating, Kunststoffe, 64(7), 341-2, 1974.

Theberge, J., Arkles, B., Wear Characteristics of Carbon Fiber Reinforced Thermoplastics, Lubric. Eng., 30(12), 585-9, 1974.

Arkles, B., Fluoropolymer Solid Lubricants, ACS Org. Coat. Plas. Chem., 34, 326-33, 1974

Christian, J. B., Arkles, B., Poly(tetrafluoroethylene) and Fluorinated Ethylene-propylene Grease Lubricants, Lubric. Eng., 30(3), 136-43, 1974.

Arkles, B., Fluoplaster for Pulverbelaggning, Plastics World (Sweden), Feb., 1974.

Theberge, J., Arkles, B., Robinson, R., Carbon Fibers Add Muscle to Plastics, Machine Design, 46(3), 102, 1974

Theberge, J., Arkles, B., Robinson, R., Carbon Fiber Reinforced Thermoplastics, 29th Soc. Plas. Ind. Composites Inst. Proc., 20D, 1974.

Arkles, B., Recycling Polytetrafluoroethylene, in “Polymers and Ecological Problems” ed. J. Guillet, Plenum, p121, 1973

Arkles, B., Theberge, J., Migratory Internal Lubrication of Thermoplastic Resins, Lubric. Eng., 29(12), 552-5, 1973; ASLE Preprint 73LC-5B-3

Theberge, J., Arkles, B., Goodhue, R. New Self-Lubricating Plastics, Machine Design, 45, 56, 1973

Arkles, B., Fluoropolymer Coatings, Vinyls and Polymers (Japan), Dec. 1973

Arkles, B., Pulberi De Acoperire Fluorocarburi Pseudolichide, Materiale Plastice (Roumania), 10(8), 450-451, 1973

Arkles, B., Fluorocarbon Powder Coatings, The Australian Paint Journal, Sept. 1973, 16-17.

Theberge, J., Arkles, B., Cloud, P., How To Get High Accuracy Plastic Gears, Machine Design, 45, 140, 1973.

Theberge, J., Arkles, B., Low Friction and Wear Thermoplastic Composites, ACS Org. Coat. Plas. Chem., 33(2), 188-94, 1973

Theberge, J., Arkles, B., Cloud, P., Goodhue, R., Gear and Bearing Design with Lubricated and Reinforced Thermoplastics, 28th Soc. Plas. Ind. Composites Inst. Proc. (RPC Inst.), 5-E, 18pp, 1973

Arkles, B., Recycling Polytetrafluoroethylene, ACS Org.Coat. Plas. Chem., 13(2), 812, 1972

Theberge, J., Arkles, B., Chemical and Hydrolysis Resistance of Glass Fortified Thermoplastics, Materials Protection and Performance, 11(4), 25, 1972.

Arkles, B., Solid Fluorocarbon Lubricants, Nat’l. Lubric. Grease Inst. (NLGI) Spokesman, 35(11), 390-8, 1972

Theberge, J., Arkles, B., Cloud, P., Low Cost Glass-Fortified Thermoplastic Resins for Automotive Applications, 27th Soc. Plas. Ind. Composites Inst. Proc., 14-C, 12pp, 1972.

Theberge, J., Arkles, B., Cloud, P., Glass Reinforced Thermoplastics, Machine Design, 43, 58, 1971.

Theberge, J., Arkles, B., Cloud, P., Thermal and Environmental Resistance of Glass Reinforced Thermoplastics, Machine Design, 43, 1971

Theberge, J., Arkles, B., Cloud, P., Environmental, Thermal and Flammability Resistance of Glass Fortified Thermoplastics for Business Machine, Appliance and Tool Housings, 26th Soc. Plas. Ind. Composites Inst. Proc., 3-A, 22pp, 1971.

©

Copyright 1991 - 2018 Gelest, Inc.